# Ontario field safety-log documentation records.

01

## [Electrical / welding and cutting work](https://ontariotraderegistry.ca/safety-logs/electrical-hot-work-permits/)

Before each welding, cutting, blow-torch, or similar ignition-source task where the constructor or employer uses a hot-work permit control.

02

## [Elevating work platform operations](https://ontariotraderegistry.ca/safety-logs/elevating-work-platforms-daily-inspection/)

Daily before use, in accordance with the manufacturer's instructions, for every elevating work platform used on the project.

03

## [Excavation and trenching](https://ontariotraderegistry.ca/safety-logs/excavation-trench-safety-logs/)

Before workers enter an excavation or trench and whenever site, soil, water, weather, support-system, or adjacent-structure conditions change.

04

## [General construction supervision](https://ontariotraderegistry.ca/safety-logs/weekly-site-safety-talks/)

At least weekly for the supervisor inspection required by section 14(4). Toolbox talks may be documented on the same cadence when used to communicate inspection findings, hazards, and controls.

05

## [Portable ladder use](https://ontariotraderegistry.ca/safety-logs/ladder-inspection-log/)

Before first use on each shift and whenever the ladder is moved, damaged, or exposed to a new hazard.

06

## [Scaffold erection and use](https://ontariotraderegistry.ca/safety-logs/scaffold-inspection-checklist/)

Before use after erection, alteration, adverse weather, impact, or any condition change.

07

## [Confined space entry](https://ontariotraderegistry.ca/safety-logs/confined-space-entry-log/)

Before every confined-space entry and whenever atmospheric, rescue, isolation, or work-scope conditions change.

08

## [Forklift and powered industrial truck operation](https://ontariotraderegistry.ca/safety-logs/forklift-pre-use-inspection-log/)

Before each shift or first use by the assigned operator.

09

## [Fall protection equipment inspection](https://ontariotraderegistry.ca/safety-logs/fall-protection-equipment-inspection/)

Before each use and after any fall arrest event, impact, visible damage, or manufacturer-specified trigger.

10

## [Traffic control plan implementation](https://ontariotraderegistry.ca/safety-logs/traffic-control-plan-checklist/)

Before lane occupation, traffic staging changes, shift changes, or municipal inspection.

11

## [Crane, hoist, and rigging lifts](https://ontariotraderegistry.ca/safety-logs/crane-hoist-lift-log/)

Before critical lifts, repeated lift sequences, equipment changes, ground-condition changes, or weather changes.

12

## [Propane cylinder storage and use](https://ontariotraderegistry.ca/safety-logs/propane-cylinder-storage-log/)

Daily when propane is stored or used on site and whenever storage locations change.

13

## [Silica dust control work](https://ontariotraderegistry.ca/safety-logs/silica-dust-control-log/)

Before dust-generating work starts and whenever cutting, grinding, drilling, ventilation, or wet-control conditions change.

14

## [Asbestos abatement notification and control](https://ontariotraderegistry.ca/safety-logs/asbestos-abatement-notification-log/)

Before abatement begins and whenever enclosure, type of operation, worker access, or clearance status changes.

15

## [Roofing fall protection controls](https://ontariotraderegistry.ca/safety-logs/roofing-fall-protection-plan/)

Before roofing work starts and whenever edge exposure, access, weather, or work area changes.

16

## [Demolition pre-start controls](https://ontariotraderegistry.ca/safety-logs/demolition-pre-start-checklist/)

Before demolition begins and when hidden services, structural instability, or adjacent occupancy conditions change.

17

## [Lockout and tagout isolation](https://ontariotraderegistry.ca/safety-logs/lockout-tagout-log/)

Before service, maintenance, demolition, tie-in, or energization work begins.

18

## [First aid station and kit inspection](https://ontariotraderegistry.ca/safety-logs/first-aid-inspection-log/)

At the start of the project, at least monthly, and after any first aid supply use.

19

## [Fire extinguisher inspection](https://ontariotraderegistry.ca/safety-logs/fire-extinguisher-inspection-log/)

Monthly and before hot-work, fuel-storage, or high-risk ignition work areas are released.

20

## [Site orientation and worker sign-in](https://ontariotraderegistry.ca/safety-logs/site-orientation-sign-in-log/)

Before a worker, visitor, subcontractor, or delivery person enters active construction areas.

---

Source: https://ontariotraderegistry.ca/safety-logs/